[subexp-daq] New warning meassage in R3BFUSER

[Weber, Guenter Dr.]

Here are the hashes of the (old) software combination that runs without issues:


(base) mbsdaq at atpnbg012:~/mbsrun/rio4/2024_mcalstruck/nurdlib$ git rev-parse --short HEAD
c36ae0a

(base) mbsdaq at atpnbg012:~/mbsrun/rio4/2024_mcalstruck/trloii$ git rev-parse --short HEAD
0020559

(base) mbsdaq at atpnbg012:~/mbsrun/rio4/2024_mcalstruck/drasi$ git rev-parse --short HEAD
1c08b62

(base) mbsdaq at atpnbg012:~/mbsrun/rio4/2024_mcalstruck/r3bfuser$ git rev-parse --short HEAD
d09918b

I hope this is what you were asking for.



Best greetings
Günter


________________________________
Von: subexp-daq <subexp-daq-bounces at lists.chalmers.se> im Auftrag von Håkan T Johansson <f96hajo at chalmers.se>
Gesendet: Donnerstag, 18. Juli 2024 16:50:42
An: Discuss use of Nurdlib, TRLO II, drasi and UCESB.
Betreff: Re: [subexp-daq] New warning meassage in R3BFUSER


On Thu, 18 Jul 2024, Weber, Guenter Dr. wrote:

>
> Dear Håkan,
>
>
> we have to DAQ systems with identical hardware. Whenever, there is a new version (TRLOII,
> NURDLIB, DRASI, etc.) from your side that we want to test, I am setting up one of them
> with the most recent software version.
>
>
> So, right now we have a running system that is roughly on the software status of two
> months ago (if I remember corretly, this was after the repository change as we first had
> to ask you to recreate the SIS3316 development branch) with some modifications from our
> side to the SIS3316 code (committed about six weeks ago).

Just so I follow correctly: both systems are tested able to run with some
(specific) software version?

Could you send the git hashes of nurdlib/r3bfuser/trloii/drasi of that
working combination?

> And we have the 'new' system
> that has identical hardware and the software status from last week.


Cheers,
Håkan



>
>
>
> Best greetings
>
> Günter
>
>
>
>
> _________________________________________________________________________________________
> Von: subexp-daq <subexp-daq-bounces at lists.chalmers.se> im Auftrag von Håkan T Johansson
> <f96hajo at chalmers.se>
> Gesendet: Donnerstag, 18. Juli 2024 15:47:46
> An: Discuss use of Nurdlib, TRLO II, drasi and UCESB.
> Betreff: Re: [subexp-daq] New warning meassage in R3BFUSER
>
> Dear Günter,
>
> did I follow this thread correctly that these tests are with 'new'
> hardware, i.e. a setup which has no working reference software?
>
> You have / are using the SIS3316 modules in another physical setup with
> some fairly recent branch in the previous nurdlib repository?
>
> https://gitlab.com/chalmers-subexp/nurdlib.prelgpl21/-/network/master
>
> --
>
> If so, there are three changes at the same time:
>
> - Nurdlib updates (also split by the repository change).
>
> - The SIS3316 code branch adapted from the previous to the new repository.
>
> - A new hardware setup.
>
> Cheers,
> Håkan
>
>
>
> On Thu, 18 Jul 2024, Weber, Guenter Dr. wrote:
>
> >
> > Dear Håkan,
> >
> >
> > with diff = 1 the DAQ is running as long as only the VULOM4B is readout. Adding a
> SIS3316
> > module results in an readout error of that module, followed by a reset of the DAQ.
> >
> >
> > Thus, I am currently unable to test SIS3316_check_hit_reworked_rebased. Sorry :-(
> >
> >
> >
> >
> > Best greetings
> >
> > Günter
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.chalmers.se/pipermail/subexp-daq/attachments/20240718/ccef78a8/attachment.html>