[subexp-daq] NURDLIB: - how to check which version is installed and how to update to the most recent version

Sun Jan 7 21:14:05 CET 2024

Dear Hans,

thank you very much and have a happy new year!

Could you give me instructions on how to update NURDLIB in an already existing DAQ system?

Would it be enough to replace the old files in the NURDLIB folder with the most recent ones and then somewhere type in "make"? And is compilation to be executed within the RIO system or on the server?

Best greetings from Jena

Günter

________________________________
Von: Hans Toshihide Törnqvist <hans.tornqvist at chalmers.se>
Gesendet: Sonntag, 7. Januar 2024 20:33:55
An: Weber, Guenter Dr.; Discuss use of Nurdlib, TRLO II, drasi and UCESB.
Betreff: Re: AW: [subexp-daq] NURDLIB: - how to check which version is installed and how to update to the most recent version

Dear Günter,

I took a shot at merging the 'mcal_daq' branch that you have been using
with the 'master' branch, you can find that merge in the branch
'mcal_daq_merge'.

That version passes my soft tests, but they are weak compared to a real
running DAQ :) So please give it a try and let me know how it goes.

Best regards,

Hans

On 2023-12-22 19:32, Weber, Guenter Dr. wrote:
> Dear Hans,
>
>
> the command
>
>
>   > git remote -v
>
>
> resulted in the following output:
>
>
> bloeher bloeher at 140.181.60.97:/u/bloeher/git-bare/nurdlib-jena.git (fetch)
> bloeher bloeher at 140.181.60.97:/u/bloeher/git-bare/nurdlib-jena.git (push)
> maxs1
>   atpnbg011:/LynxOS/mbsusr/mbsdaq/mbsrun/rio4/2021_mcalstruck/nurdlib
> (fetch)
> maxs1
>   atpnbg011:/LynxOS/mbsusr/mbsdaq/mbsrun/rio4/2021_mcalstruck/nurdlib (push)
> origin  /u/htoernqv/repos/nurdlib.git/ (fetch)
> origin  /u/htoernqv/repos/nurdlib.git/ (push)
>
> I added the new git repository and executed the push command as
> explained in your e-mail. Looks like everything worked out fine.
>
>
>
>
> Best greetings
>
> Günter
>
>
>
> ------------------------------------------------------------------------
> *Von:* Hans Toshihide Törnqvist <hans.tornqvist at chalmers.se>
> *Gesendet:* Freitag, 22. Dezember 2023 18:25:05
> *An:* Discuss use of Nurdlib, TRLO II, drasi and UCESB.; Weber, Guenter Dr.
> *Betreff:* Re: [subexp-daq] NURDLIB: - how to check which version is
> installed and how to update to the most recent version
> Dear Günter,
>
> On 2023-12-22 17:55, Weber, Guenter Dr. wrote:
>> Dear Hakan,
>>
>> thank you very much for the reply.
>>
>> On my system the output of the command is as follows:
>>
>> git describe --all --always --dirty --long
>> -> heads/mcal_daq-0-gb2bc721
>>
>> How shall I interpret this output?
>
> It looks like your repository has the branch 'mcal_daq' active, and part
> of the checksum is b2bc721.
>
> The very good news is that it doesn't say "-dirty" at the end, which
> means that there are no uncommitted changes, yet :)
>
>> I guess I should compare it to something I can find under
>> https://gitlab.com/chalmers-subexp <https://gitlab.com/chalmers-subexp>
> <https://gitlab.com/chalmers-subexp <https://gitlab.com/chalmers-subexp>>
>
> It seems like the branch/commit are not in any of the "official"
> repositories, I had a look. However, I did find 'mcal_daq' branches in
> some private repositories at GSI by Bastii, but I cannot find the
> b2bc721 commit. I also cannot find several of the commit messages.
>
> The safest way forward would be if you could push your version of
> nurdlib to gitlab. It looks like you are currently a member of the
> project, so try:
>
>   > git remote -v
>
> If the gitlab repo is not listed there, do:
>
>   > git remote add gitlab git at gitlab.com:chalmers-subexp/nurdlib.git
>
> Then:
>
>   > git push gitlab mcal_daq
>
> I can then pull that and see how to get that into the main branch. Once
> that's done, I will ask you to try the new version to make sure it still
> runs correctly. And of course if there are problems with the above
> commands, let us know.
>
> Best regards,
>
> Hans
>
>> But there I only can access the following projects:
>>
>> - drasi
>> - egmwsort
>> - ucesb
>>
>> Best greetings
>> Günter
>>
>>
>> ------------------------------------------------------------------------
>> *Von:* subexp-daq <subexp-daq-bounces at lists.chalmers.se> im Auftrag von
>> Håkan T Johansson <f96hajo at chalmers.se>
>> *Gesendet:* Freitag, 22. Dezember 2023 17:48:46
>> *An:* Discuss use of Nurdlib, TRLO II, drasi and UCESB.
>> *Betreff:* Re: [subexp-daq] NURDLIB: - how to check which version is
>> installed and how to update to the most recent version
>>
>> Dear Günter,
>>
>> On Fri, 22 Dec 2023, Weber, Guenter Dr. wrote:
>>
>>>
>>> Dear all,
>>>
>>>
>>> I would like to know how ...
>>>
>>>
>>> 1) I can check which version of NURDLIB is installed on my system.
>>
>> Please somewhere under the nurdlib/ directory, run:
>>
>> git describe --all --always --dirty --long
>>
>>> 2) I can update to the most recent 'official' version.
>>
>> cd <directory-where-the-new-copy-should-be-under>
>>
>> git clone git at gitlab.com:chalmers-subexp/nurdlib.git
>>
>> Then:
>>
>> cd nurdlib
>>
>> For that git clone to work, you'll first have to set up ssh keys with
>> gitlab.  That would be useful also in order to upload code.  See:
>>
>> https://docs.gitlab.com/ee/user/ssh.html
> <https://docs.gitlab.com/ee/user/ssh.html>
>> <https://docs.gitlab.com/ee/user/ssh.html
> <https://docs.gitlab.com/ee/user/ssh.html>>
>>
>> and please *do* use a passphrase for the ssh key.
>>
>> Cheers,
>> Håkan
>>
>>
>>>
>>>
>>> Thank you very much!
>>>
>>>
>>>
>>> Best greetings
>>>
>>> Günter
>>>
>>>
>>>
>>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.chalmers.se/pipermail/subexp-daq/attachments/20240107/4ef45979/attachment-0001.html>