[subexp-daq] Question on default firmware for VULOM

[Weber, Guenter Dr.]

Dear friends,


I restarted the crate and now get the following error message when starting the DAQ:


10: crate/crate.c:923: .Slow-init module[0]=GSI_VULOM.
LOG: TRLO: MD5SUM: 0x426cb99c (CT: 5bba6507 = 2018-10-07 19:56:55 UTC)
WARNING: Known firmware (alias): 0x6e4ba1a9.
WARNING: Known firmware (alias): 0x1409285e.
WARNING: Known firmware (alias): 0xa73c5093.
WARNING: Known firmware (alias): 0x6e4ba1a9.
WARNING: Known firmware (alias): 0x1409285e.
FATAL: TRLO firmware wrong: 0x426cb99c, expected 0x6e4ba1a9 or alias.


I assume that upon power-on the VULOM is booting with a default firmware that is not the one necessary to run with the most recent version of NURDLIB, etc.


How can I tell the VULOM which firmware version from its memory it should load as default?




Thank you very much!




Best greetings

Günter

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.chalmers.se/pipermail/subexp-daq/attachments/20240219/5788b2ae/attachment.html>