[subexp-daq] How to start a DAQ system after NURDLIB, TRLOII, DRASI, etc. were updated

[Håkan T Johansson]

Dear Günter,

On Tue, 23 Jan 2024, Weber, Guenter Dr. wrote:

> as far as I know we never touched the SIS3316 firmware. But, as you know by
> now, I know every little about the details of our DAQ, unfortunately.

Could you for the other DAQ system (with working SIS3316), check the 
output at startup or module re-init corresponding to these lines:

10: module/sis_3316/sis_3316.c:1355: ..Serial number=0x00800178.
10: module/sis_3316/sis_3316.c:1362: ..id/firmware=0x3316200e.
10: module/sis_3316/sis_3316.c:1365: ..adc[0] firmware=0x0125000c.
10: module/sis_3316/sis_3316.c:1365: ..adc[1] firmware=0x0125000c.
10: module/sis_3316/sis_3316.c:1365: ..adc[2] firmware=0x0125000c.
10: module/sis_3316/sis_3316.c:1365: ..adc[3] firmware=0x0125000c.

10: module/sis_3316/sis_3316.c:1355: ..Serial number=0x008001a7.
10: module/sis_3316/sis_3316.c:1362: ..id/firmware=0x33162010.
10: module/sis_3316/sis_3316.c:1365: ..adc[0] firmware=0x01250011.
10: module/sis_3316/sis_3316.c:1365: ..adc[1] firmware=0x01250011.
10: module/sis_3316/sis_3316.c:1365: ..adc[2] firmware=0x01250011.
10: module/sis_3316/sis_3316.c:1365: ..adc[3] firmware=0x01250011.

and see what versions those modules have loaded?

Cheers,
Håkan