[subexp-daq] NURDLIB: - how to check which version is installed and how to update to the most recent version

Weber, Guenter Dr. g.weber at hi-jena.gsi.de
Mon Jan 8 15:01:50 CET 2024 

Dear Hans,


thank you very much!


It now dies at a later stage of the compilation process.


...

[tests/caen_v792.c:73: IPEDConversion]
[tests/caen_v820.c:32: DefaultConfig]
2024-02-08,16:59:58:INFO: Will try default cfg path='/LynxOS/mbsusr/mbsdaq/mbsrun/rio4/2023_mcalstruck/nurdlib/cfg/default', can be set with NURDLIB_DEF_PATH. [config/config.c:181]
2024-02-08,16:59:58:INFO: Opened './tests/caen_v820_empty.cfg' { [config/parser.c:287]
2024-02-08,16:59:58:INFO: .Opened '/LynxOS/mbsusr/mbsdaq/mbsrun/rio4/2023_mcalstruck/nurdlib/cfg/default/caen_v820.cfg' { [config/parser.c:287]
2024-02-08,16:59:58:INFO: .Closed '/LynxOS/mbsusr/mbsdaq/mbsrun/rio4/2023_mcalstruck/nurdlib/cfg/default/caen_v820.cfg' } [config/parser.c:299]
2024-02-08,16:59:58:INFO: .Opened '/LynxOS/mbsusr/mbsdaq/mbsrun/rio4/2023_mcalstruck/nurdlib/cfg/default/module_log_level.cfg' { [config/parser.c:287]
2024-02-08,16:59:58:INFO: .Closed '/LynxOS/mbsusr/mbsdaq/mbsrun/rio4/2023_mcalstruck/nurdlib/cfg/default/module_log_level.cfg' } [config/parser.c:299]
2024-02-08,16:59:58:INFO: Closed './tests/caen_v820_empty.cfg' } [config/parser.c:299]
2024-02-08,16:59:58:ERRR: Could not find keyword config 'paux'. [config/config.c:711]
2024-02-08,16:59:58:ERRR: Calling abort()... [config/config.c:711]
make: *** [build_cc_ppc-linux_4.2.2_debug/test_ok] Error 1


The problem is that the environment variable NURDLIB_DEF_PATH is still set to the old directory ('2023_mcalstruck' instead of '2024_mcalstruck', which I created today). Of course, I can change this now. But is there a list of all the environment variables that need to be updated? Or is NURDLIB_DEF_PATH the only one?



Best greetings

Günter

________________________________
Von: subexp-daq <subexp-daq-bounces at lists.chalmers.se> im Auftrag von Hans Toshihide Törnqvist <hans.tornqvist at chalmers.se>
Gesendet: Montag, 8. Januar 2024 14:19:41
An: Weber, Guenter Dr.; Discuss use of Nurdlib, TRLO II, drasi and UCESB.
Betreff: Re: [subexp-daq] NURDLIB: - how to check which version is installed and how to update to the most recent version

I have pushed a new version to Gitlab that builds on a rio4 with the
same mapping and trlo ii support.

*Crossing fingers*

Cheers,

Hans

On 2024-01-08 11:46, Hans Toshihide Törnqvist wrote:
> This is on me... Somehow I keep reintroducing this problem (: I will
> look for a similar running rio4 and build this myself and give you a new
> version.
>
> Cheers,
>
> Hans
>
> On 2024-01-08 11:44, Weber, Guenter Dr. wrote:
>> Alright. Sorry for being stupid!
>>
>>
>> With 'make' everything runs smoothly up to this point:
>>
>>
>> ...
>>
>> SUITE build_cc_ppc-linux_4.2.2_debug/ntest/tests/fail.suite
>> SUITE build_cc_ppc-linux_4.2.2_debug/ntest/tests/fixture.suite
>> SUITE build_cc_ppc-linux_4.2.2_debug/ntest/tests/pass.suite
>> SUITE build_cc_ppc-linux_4.2.2_debug/ntest/tests/signal.suite
>> SUITE build_cc_ppc-linux_4.2.2_debug/ntest/tests/string.suite
>> SUITE build_cc_ppc-linux_4.2.2_debug/ntest/tests/verbose.suite
>> SUITS build_cc_ppc-linux_4.2.2_debug/ntest/tests/ntest_.suites
>> NTEST build_cc_ppc-linux_4.2.2_debug/ntest/tests/ntest_.c
>> CCGEN build_cc_ppc-linux_4.2.2_debug/ntest/tests/ntest_.o
>> LD    build_cc_ppc-linux_4.2.2_debug/test_ntest
>> LD    build_cc_ppc-linux_4.2.2_debug/test
>> build_cc_ppc-linux_4.2.2_debug/tools/hwmap_error_internal.o:(.sdata+0x0): undefined reference to `trcom_hwmap_error_internal'
>> collect2: ld returned 1 exit status
>> make: *** [build_cc_ppc-linux_4.2.2_debug/test] Error 1
>>
>>
>>
>> What should I do?
>>
>>
>>
>>
>> Best greetings
>>
>> Günter
>>
>>
>>
>> ------------------------------------------------------------------------
>> *Von:* Hans Toshihide Törnqvist <hans.tornqvist at chalmers.se>
>> *Gesendet:* Montag, 8. Januar 2024 11:38:23
>> *An:* Discuss use of Nurdlib, TRLO II, drasi and UCESB.; Weber,
>> Guenter Dr.
>> *Betreff:* Re: [subexp-daq] NURDLIB: - how to check which version is
>> installed and how to update to the most recent version
>> Dear Günter,
>>
>> Aha, it looks like Håkan's instructions could be misinterpreted, what
>> you are seeing is expected behaviour :)
>>
>> 'make clean' will clean the build directory, which it does with 'rm -rf
>> build_...'.
>>
>> 'make' without additional arguments builds nurdlib which is what you
>> want now.
>>
>> Cheers,
>> Hans
>>
>> On 2024-01-08 11:29, Weber, Guenter Dr. wrote:
>>> Dear Hans,
>>>
>>>
>>> I copied the directory of our existing DAQ system:
>>>
>>>   > cp -r old_daq new_daq
>>>
>>>
>>> Then deleted the NURDLIB folder, downloaded the new one and switched
>>> to the mcal_daq_merge branch using
>>>
>>>   > git checkout mcal_daq_merge
>>>
>>>
>>> Then I connected to the RIO and tried to compile in the folder of the
>>> new NURDLIB. This is the result:
>>>
>>> RIO4-MCAL-2 mbsdaq > make clean
>>> Could not figure out RFX1 firmware (8-xdigit number), skipping.
>>> TRIDI_FW=d374466d
>>> VULOM4_FW=d96ffc88
>>> RFX1_FW=
>>> rm -rf build_cc_ppc-linux_4.2.2_debug
>>>
>>>
>>> No further message and a new folder build_cc_ppc-linux_4.2.2_debug is
>>> not created.
>>>
>>>
>>> When checking the Makefile, I noticed that in the old NURDLIB folder
>>> there is no /gmake, instead there is a file make.mk which probably
>>> does the same job.
>>>
>>>
>>> Probably there are some adjustment that I need to make, so that the
>>> new NURDLIB version can compile on our system. But I don't know where
>>> to look at, unfortunately.
>>>
>>>
>>> Could you give us advice?
>>>
>>>
>>>
>>>
>>>
>>> Best greetings
>>>
>>> Günter
>>>
>>>
>>>
>>>
>>>
>>>
>>> ------------------------------------------------------------------------
>>> *Von:* subexp-daq <subexp-daq-bounces at lists.chalmers.se> im Auftrag
>>> von Håkan T Johansson <f96hajo at chalmers.se>
>>> *Gesendet:* Sonntag, 7. Januar 2024 21:48:21
>>> *An:* Discuss use of Nurdlib, TRLO II, drasi and UCESB.
>>> *Betreff:* Re: [subexp-daq] NURDLIB: - how to check which version is
>>> installed and how to update to the most recent version
>>>
>>> Dear Günter,
>>>
>>> I would very much suggest to do the 'update' in a copy of the directory
>>> tree that you are using, such that it is very easy to go back.  (Or go
>>> between the systems.)
>>>
>>> For the update, something along the lines:
>>>
>>> git fetch origin   # or instead of 'origin' the shorthand you have
>>> for the
>>>                       # remote repo
>>>
>>> git log --all --decorate --graph --oneline --color   # just to see where
>>>                                           # you are, and where you
>>> would go
>>>
>>> git checkout mcal_daq_merge    # if that fails, try
>>> origin/mcal_daq_merge
>>>
>>>
>>> You would want to run the git commands etc on the PC, but
>>> compilations of
>>> code that runs on the RIO needs to be done on the RIO.
>>>
>>> A 'make clean' is probbaly a healthy start.
>>>
>>> But first - please make sure to work in copied directory tree.
>>>
>>> Cheers,
>>> Håkan
>>>
>>>
>>>
>>> On Sun, 7 Jan 2024, Weber, Guenter Dr. wrote:
>>>
>>>>
>>>> Dear Hans,
>>>>
>>>>
>>>> thank you very much and have a happy new year!
>>>>
>>>>
>>>> Could you give me instructions on how to update NURDLIB in an already
>>>> existing DAQ system?
>>>>
>>>>
>>>> Would it be enough to replace the old files in the NURDLIB folder
>>>> with the
>>>> most recent ones and then somewhere type in "make"? And is
>>>> compilation to be
>>>> executed within the RIO system or on the server?
>>>>
>>>>
>>>>
>>>>
>>>> Best greetings from Jena
>>>>
>>>> Günter
>>>>
>>>>
>>>>
>>>>
>>>> ____________________________________________________________________________
>>>> Von: Hans Toshihide Törnqvist <hans.tornqvist at chalmers.se>
>>>> Gesendet: Sonntag, 7. Januar 2024 20:33:55
>>>> An: Weber, Guenter Dr.; Discuss use of Nurdlib, TRLO II, drasi and
>>>> UCESB.
>>>> Betreff: Re: AW: [subexp-daq] NURDLIB: - how to check which version is
>>>> installed and how to update to the most recent version Dear Günter,
>>>>
>>>> I took a shot at merging the 'mcal_daq' branch that you have been using
>>>> with the 'master' branch, you can find that merge in the branch
>>>> 'mcal_daq_merge'.
>>>>
>>>> That version passes my soft tests, but they are weak compared to a real
>>>> running DAQ :) So please give it a try and let me know how it goes.
>>>>
>>>> Best regards,
>>>>
>>>> Hans
>>>>
>>>> On 2023-12-22 19:32, Weber, Guenter Dr. wrote:
>>>> > Dear Hans,
>>>> >
>>>> >
>>>> > the command
>>>> >
>>>> >
>>>> >   > git remote -v
>>>> >
>>>> >
>>>> > resulted in the following output:
>>>> >
>>>> >
>>>> > bloeher bloeher at 140.181.60.97:/u/bloeher/git-bare/nurdlib-jena.git
>>>> (fetch)
>>>> > bloeher bloeher at 140.181.60.97:/u/bloeher/git-bare/nurdlib-jena.git
>>>> (push)
>>>> > maxs1 >
>>>>  atpnbg011:/LynxOS/mbsusr/mbsdaq/mbsrun/rio4/2021_mcalstruck/nurdlib
>>>> > (fetch)
>>>> > maxs1 >
>>>>  atpnbg011:/LynxOS/mbsusr/mbsdaq/mbsrun/rio4/2021_mcalstruck/nurdlib
>>>> (push)
>>>> > origin  /u/htoernqv/repos/nurdlib.git/ (fetch)
>>>> > origin  /u/htoernqv/repos/nurdlib.git/ (push)
>>>> >
>>>> > I added the new git repository and executed the push command as
>>>> > explained in your e-mail. Looks like everything worked out fine.
>>>> >
>>>> >
>>>> >
>>>> >
>>>> > Best greetings
>>>> >
>>>> > Günter
>>>> >
>>>> >
>>>> >
>>>> >
>>>> ------------------------------------------------------------------------
>>>> > *Von:* Hans Toshihide Törnqvist <hans.tornqvist at chalmers.se>
>>>> > *Gesendet:* Freitag, 22. Dezember 2023 18:25:05
>>>> > *An:* Discuss use of Nurdlib, TRLO II, drasi and UCESB.; Weber,
>>>> Guenter
>>>> Dr.
>>>> > *Betreff:* Re: [subexp-daq] NURDLIB: - how to check which version is
>>>> > installed and how to update to the most recent version
>>>> > Dear Günter,
>>>> >
>>>> > On 2023-12-22 17:55, Weber, Guenter Dr. wrote:
>>>> >> Dear Hakan,
>>>> >>
>>>> >> thank you very much for the reply.
>>>> >>
>>>> >> On my system the output of the command is as follows:
>>>> >>
>>>> >> git describe --all --always --dirty --long
>>>> >> -> heads/mcal_daq-0-gb2bc721
>>>> >>
>>>> >> How shall I interpret this output?
>>>> >
>>>> > It looks like your repository has the branch 'mcal_daq' active,
>>>> and part
>>>> > of the checksum is b2bc721.
>>>> >
>>>> > The very good news is that it doesn't say "-dirty" at the end, which
>>>> > means that there are no uncommitted changes, yet :)
>>>> >
>>>> >> I guess I should compare it to something I can find under
>>>> >> https://gitlab.com/chalmers-subexp
>>>> <https://gitlab.com/chalmers-subexp>
>> <https://gitlab.com/chalmers-subexp <https://gitlab.com/chalmers-subexp>>
>>> <https://gitlab.com/chalmers-subexp <https://gitlab.com/chalmers-subexp
>> <https://gitlab.com/chalmers-subexp>>>
>>>> > <https://gitlab.com/chalmers-subexp
>>>> <https://gitlab.com/chalmers-subexp
>>> <https://gitlab.com/chalmers-subexp
>>> <https://gitlab.com/chalmers-subexp>>>>
>>>> >
>>>> > It seems like the branch/commit are not in any of the "official"
>>>> > repositories, I had a look. However, I did find 'mcal_daq'
>>>> branches in
>>>> > some private repositories at GSI by Bastii, but I cannot find the
>>>> > b2bc721 commit. I also cannot find several of the commit messages.
>>>> >
>>>> > The safest way forward would be if you could push your version of
>>>> > nurdlib to gitlab. It looks like you are currently a member of the
>>>> > project, so try:
>>>> >
>>>> >   > git remote -v
>>>> >
>>>> > If the gitlab repo is not listed there, do:
>>>> >
>>>> >   > git remote add gitlab git at gitlab.com:chalmers-subexp/nurdlib.git
>>>> >
>>>> > Then:
>>>> >
>>>> >   > git push gitlab mcal_daq
>>>> >
>>>> > I can then pull that and see how to get that into the main branch.
>>>> Once
>>>> > that's done, I will ask you to try the new version to make sure it
>>>> still
>>>> > runs correctly. And of course if there are problems with the above
>>>> > commands, let us know.
>>>> >
>>>> > Best regards,
>>>> >
>>>> > Hans
>>>> >
>>>> >> But there I only can access the following projects:
>>>> >>
>>>> >> - drasi
>>>> >> - egmwsort
>>>> >> - ucesb
>>>> >>
>>>> >> Best greetings
>>>> >> Günter
>>>> >>
>>>> >>
>>>> >>
>>>> ------------------------------------------------------------------------
>>>> >> *Von:* subexp-daq <subexp-daq-bounces at lists.chalmers.se> im
>>>> Auftrag von
>>>> >> Håkan T Johansson <f96hajo at chalmers.se>
>>>> >> *Gesendet:* Freitag, 22. Dezember 2023 17:48:46
>>>> >> *An:* Discuss use of Nurdlib, TRLO II, drasi and UCESB.
>>>> >> *Betreff:* Re: [subexp-daq] NURDLIB: - how to check which version is
>>>> >> installed and how to update to the most recent version
>>>> >>
>>>> >> Dear Günter,
>>>> >>
>>>> >> On Fri, 22 Dec 2023, Weber, Guenter Dr. wrote:
>>>> >>
>>>> >>>
>>>> >>> Dear all,
>>>> >>>
>>>> >>>
>>>> >>> I would like to know how ...
>>>> >>>
>>>> >>>
>>>> >>> 1) I can check which version of NURDLIB is installed on my system.
>>>> >>
>>>> >> Please somewhere under the nurdlib/ directory, run:
>>>> >>
>>>> >> git describe --all --always --dirty --long
>>>> >>
>>>> >>> 2) I can update to the most recent 'official' version.
>>>> >>
>>>> >> cd <directory-where-the-new-copy-should-be-under>
>>>> >>
>>>> >> git clone git at gitlab.com:chalmers-subexp/nurdlib.git
>>>> >>
>>>> >> Then:
>>>> >>
>>>> >> cd nurdlib
>>>> >>
>>>> >> For that git clone to work, you'll first have to set up ssh keys
>>>> with
>>>> >> gitlab.  That would be useful also in order to upload code.  See:
>>>> >>
>>>> >> https://docs.gitlab.com/ee/user/ssh.html
>> <https://docs.gitlab.com/ee/user/ssh.html>
>>> <https://docs.gitlab.com/ee/user/ssh.html
>> <https://docs.gitlab.com/ee/user/ssh.html>>
>>>> > <https://docs.gitlab.com/ee/user/ssh.html
>>> <https://docs.gitlab.com/ee/user/ssh.html
>> <https://docs.gitlab.com/ee/user/ssh.html>>>
>>>> >> <https://docs.gitlab.com/ee/user/ssh.html
>>>> > <https://docs.gitlab.com/ee/user/ssh.html
>>> <https://docs.gitlab.com/ee/user/ssh.html
>> <https://docs.gitlab.com/ee/user/ssh.html>>>>
>>>> >>
>>>> >> and please *do* use a passphrase for the ssh key.
>>>> >>
>>>> >> Cheers,
>>>> >> Håkan
>>>> >>
>>>> >>
>>>> >>>
>>>> >>>
>>>> >>> Thank you very much!
>>>> >>>
>>>> >>>
>>>> >>>
>>>> >>> Best greetings
>>>> >>>
>>>> >>> Günter
>>>> >>>
>>>> >>>
>>>> >>>
>>>> >>>
>>>> >>
>>>>
>>>>
>>>
--
subexp-daq mailing list
subexp-daq at lists.chalmers.se
https://lists.chalmers.se/mailman/listinfo/subexp-daq
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.chalmers.se/pipermail/subexp-daq/attachments/20240108/0e4a2df2/attachment-0001.html>

More information about the subexp-daq mailing list