[subexp-daq] NURDLIB: - how to check which version is installed and how to update to the most recent version

[Weber, Guenter Dr.]

Dear Hans,


the command


 > git remote -v


resulted in the following output:


bloeher bloeher at 140.181.60.97:/u/bloeher/git-bare/nurdlib-jena.git (fetch)
bloeher bloeher at 140.181.60.97:/u/bloeher/git-bare/nurdlib-jena.git (push)
maxs1   atpnbg011:/LynxOS/mbsusr/mbsdaq/mbsrun/rio4/2021_mcalstruck/nurdlib (fetch)
maxs1   atpnbg011:/LynxOS/mbsusr/mbsdaq/mbsrun/rio4/2021_mcalstruck/nurdlib (push)
origin  /u/htoernqv/repos/nurdlib.git/ (fetch)
origin  /u/htoernqv/repos/nurdlib.git/ (push)


I added the new git repository and executed the push command as explained in your e-mail. Looks like everything worked out fine.




Best greetings

Günter



________________________________
Von: Hans Toshihide Törnqvist <hans.tornqvist at chalmers.se>
Gesendet: Freitag, 22. Dezember 2023 18:25:05
An: Discuss use of Nurdlib, TRLO II, drasi and UCESB.; Weber, Guenter Dr.
Betreff: Re: [subexp-daq] NURDLIB: - how to check which version is installed and how to update to the most recent version

Dear Günter,

On 2023-12-22 17:55, Weber, Guenter Dr. wrote:
> Dear Hakan,
>
> thank you very much for the reply.
>
> On my system the output of the command is as follows:
>
> git describe --all --always --dirty --long
> -> heads/mcal_daq-0-gb2bc721
>
> How shall I interpret this output?

It looks like your repository has the branch 'mcal_daq' active, and part
of the checksum is b2bc721.

The very good news is that it doesn't say "-dirty" at the end, which
means that there are no uncommitted changes, yet :)

> I guess I should compare it to something I can find under
> https://gitlab.com/chalmers-subexp <https://gitlab.com/chalmers-subexp>

It seems like the branch/commit are not in any of the "official"
repositories, I had a look. However, I did find 'mcal_daq' branches in
some private repositories at GSI by Bastii, but I cannot find the
b2bc721 commit. I also cannot find several of the commit messages.

The safest way forward would be if you could push your version of
nurdlib to gitlab. It looks like you are currently a member of the
project, so try:

 > git remote -v

If the gitlab repo is not listed there, do:

 > git remote add gitlab git at gitlab.com:chalmers-subexp/nurdlib.git

Then:

 > git push gitlab mcal_daq

I can then pull that and see how to get that into the main branch. Once
that's done, I will ask you to try the new version to make sure it still
runs correctly. And of course if there are problems with the above
commands, let us know.

Best regards,

Hans

> But there I only can access the following projects:
>
> - drasi
> - egmwsort
> - ucesb
>
> Best greetings
> Günter
>
>
> ------------------------------------------------------------------------
> *Von:* subexp-daq <subexp-daq-bounces at lists.chalmers.se> im Auftrag von
> Håkan T Johansson <f96hajo at chalmers.se>
> *Gesendet:* Freitag, 22. Dezember 2023 17:48:46
> *An:* Discuss use of Nurdlib, TRLO II, drasi and UCESB.
> *Betreff:* Re: [subexp-daq] NURDLIB: - how to check which version is
> installed and how to update to the most recent version
>
> Dear Günter,
>
> On Fri, 22 Dec 2023, Weber, Guenter Dr. wrote:
>
>>
>> Dear all,
>>
>>
>> I would like to know how ...
>>
>>
>> 1) I can check which version of NURDLIB is installed on my system.
>
> Please somewhere under the nurdlib/ directory, run:
>
> git describe --all --always --dirty --long
>
>> 2) I can update to the most recent 'official' version.
>
> cd <directory-where-the-new-copy-should-be-under>
>
> git clone git at gitlab.com:chalmers-subexp/nurdlib.git
>
> Then:
>
> cd nurdlib
>
> For that git clone to work, you'll first have to set up ssh keys with
> gitlab.  That would be useful also in order to upload code.  See:
>
> https://docs.gitlab.com/ee/user/ssh.html
> <https://docs.gitlab.com/ee/user/ssh.html>
>
> and please *do* use a passphrase for the ssh key.
>
> Cheers,
> Håkan
>
>
>>
>>
>> Thank you very much!
>>
>>
>>
>> Best greetings
>>
>> Günter
>>
>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.chalmers.se/pipermail/subexp-daq/attachments/20231222/0503d2dd/attachment.html>